Pressure Digital Manometer
The Pressure Digital Manometer from SST Controls is available in ranges up to 32,000psi (2200 barG) and has a unique removable display to download data without interrupting or removing the sensor from the process line. The data logger is also ATEX Zone 0 compliant.
The ability to remove the display from the sensor live in a hazardous area allows data to be recovered faster and without process interruption.
The display on the Pressure Digital Manometer is interchangeable between pressure sensors allowing the recording of data to be easily maintained without the expense of individual full systems.
Recording up to 250000 readings at a maximum of 50Hz of both pressure and temperature allows the testing of pressure relief valves and rupture discs. The Pressure Digital Manometer comes with easy to use software for setting pressure and temperature units and downloading the data as a .csv file.
The Pressure Digital Manometer display and transmitters are constructed of stainless steel with welded seals and high over pressure ratings. The units have IP67 rated environmental protection and a battery life of more than 2000 hours (83 days continuous use).
- Detachable logger display
- Zone 0 certified
- Pressure measurements up to 32,000psi (2200bar)
- Selectable temperature measurement
- 0.125% accuracy
- Compensated temperature range of -10 to +55degC
- Up to 50Hz data recording rate
- 9/16″-18UNF or M20 X 1.5 as standard (other threads available)
- IP67 rated
- Battery life up to 5 years (Standard Duracell PlusPower AA batteries)
- High overpressure rating
- All stainless steel with welded seals
- Metric and Imperial HP fitting thread options
- Simple software for .csv file export
- Allows recording of tag number or job onto data
- Display shows Min and Max temperatures
- High accuracy 0.125% typical can be used to calibrate other gauges
- Standard USB to Jack plug cable for setup and download
- 7 digit display with backlight
- Memory Capacity 250000 readings of both pressure and temperature
- Wellhead pressure monitoring
- Hydraulic leak testing
- Gas wellhead build-up tests
- Simulation monitoring
- Pipeline monitoring
- Fracture monitoring
- Safety valve tests
- Injection pressure monitoring
- Perforation monitoring
- Workover monitoring
- Drawdown tests
- Deliverability testing
- Injection (Step) rate testing
- Injection fall-off testing
- Pressure gradients
- Burst disc tests via 50Hz logging
- Reservoir build-ups
- Integrity testing
- Geothermal monitoring
- Pre-frac testing
Does the logger display both pressure and temperature?
Yes, both actual pressure and actual temperature are displayed along with the minimum and maximums of both.
Can the readings of minimum and maximum be reset?
The minimum and maximums can be reset via button pushes on the display.
How fast are the readings sampled and recorded?
The sample speed is adjustable to look at the sensor 50x per second, 20x per second or 1x per second. The recording or logging speed is adjustable from 50Hz to minutes and hours.
Can the logging be started and stopped via the front panel?
Yes, The display has three buttons to enter and scroll through the menus. Sample and logging speed can be adjusted and tag or log description entered to create separate files in memory.
Can the logger be connected to multiple transmitters without connection to a pc?
Yes, the display head can be pulled from the pressure transmitter and immediately be connected to another pressure transmitter. The pressure transmitter transmits the serial number and pressure range to the display.
If I am logging one transmitter and pull the display off that one will the file corrupt?
No. As soon as the display head senses the removal of a pressure transmitter it stops logging and closes the file. When you then reconnect to the same or a different pressure transmitter you will need to scroll through to “datalogging” and start another log. The unit will not automatically start logging.
Can the logger be connected to a pc to log data directly to it?
No. The logging is only internal to the display. It can be connected to a pc to see current readings and for calibration and configuration. The unit can NOT be connected to a pc while in a hazardous area and the back cover hiding the interface connection on the display, not removed until in a safe area.
Can the units of measurement be changed?
The logger records both pressure and temperature and both units of measurement can be changed on the display or via the pc interface (bar, psi, mmHg, etc, and C, F or Kelvin.
What happens when the memory is full?
The logger can be set to overwrite the oldest data or stop recording when full. Both options are settable via the pc software or via the front panel buttons.
If the pressure transmitter is damaged, is a complete new system required
Subject to repair analysis, worst case a new pressure transmitter might be needed but the old display will continue to work with the new transmitter which minimises replacement costs.